Li2ZrO3 coated NMC811 cathode powder provides superior capacity and rate capability when used with sulfide electrolytes. The Li2ZrO3 coating on NMC811 cathode not only provides a protective surface layer but also optimizes the electrochemical performance of the material. Specification: Appearance: Black powder Formula: Li2ZrO3(0.4wt%)-LiNi0.8Mn0.1Co0.1O2 Chemical Name: Lithium Zirconium Oxide coated Lithium Nickel Manganese Cobalt Oxide Particle Size: D10: ~5.0 µm D50: ~13.0 µm D90: ~35.0 µm Discharge Capacity ~172 mAh/g (vs. Li, C/20, 2.5-4.4V) 1st cycle Efficiency: ~80 % (vs. Li, C/20, 2.5-4.4 V) Testing conditions Stack pressure: 10 MPa Temperature: 28 °C Composite cathode: LZO-NMC811/LPSCl/C (75/22/3) Ampcera Nano sulfide (CL15-N) used. Areal loading: 14 mg/cm2 of LZO-NMC811 Current: C/20 (0.133 mA/cm2, 1C = 190 mAh/g) Cell structure: LZO-NMC811 | LPSCl | Li *Please note that capacity may vary depending on temperature, stack pressure, cell design and composite cathode ratio. Publications using Ampcera coated cathode (to list a few) Deciphering the conflict between ion and electron percolating networks in solid-state battery cathodes, ESS Batteries, 2026 Accelerating laboratory-based, all-solid-state battery research and development: Industrially relevant small-batch dry-processing, small and low-cost test fixtures, and short-tolerant separators, J. Energy Storage, 2026 Conductive carbon embedded beneath cathode active material for longevity of solid-state batteries, J. Mater. Chem. A, 2024